The so called Miracle Needle
is a micro-electronic product developed 
from the principle and therapy of Chinese traditional
acupuncture and moxibustion and combined with the modern micro-electronic
technology.
This instruction has a feature that it could locate the
acupuncture point by itself. In order to enhance the conductivity, be sure
that any oil or sweat on the skin at where the desired acupuncture point
will be located should be cleaned off with a wet cloth. when the
instrument is moving on the skin, once the desired point is located, the
red indicator on the instrument sill be off while the green indicator is
on and a buzz will be heard. Now the treatment could be started by moving
the button.
If the acupuncture point located is correct, the normal
treatment process will sufficiently take 30 seconds and there is almost mo
pain during this process. It is worry free of any infections since the
needle will never insert into the skin.
The instrument is a mini-pack, just as a pen, without any
cords plates as one of the most remarkable advantages comparing with those
ordinary electronic instrument for the same purpose.
Please note that the battery must be charged if the red
and green indicators become flashing or lit at the same time, or the pulse
interval become longer which indicators a sign of charging battery.
According to the clinical diagnosis this instrument could
be applied to many diseases, such as hypertension, diabetes, apoplexy,
bronchitis, paralysis, neurasthenia, rhinitis etc.
This pen like instrument is easy for carrying around and
operation. It can strengthen the power besides health protection.
This instrument is liable for its easy operation and
safety. The stimulating intensity is adjustable. The current used in
search mode is 1.0mA and in operation mode (treatment) is 50mA with an
intensity of stimulating pulse between 105V and 230V.
For instance, if you have a headache, you have to consult
with the acupuncture point chart and find out the acu-point. Once the
point is located, you may start the instrument by turning the switch(5) to
"ON" position. The red indicator(2) will turn on indicating that
the instrument is in operation. Holding this instrument as a pen and
carefully put it with its sensor(7) to the area of skin where the desired
point is supposed to be and search for the point by slow motion.
When the point is found, you will be warned by a buzzer
and the green indicator is on while the red indicator is off. Press
button(5) to start the treatment, you may get a feeling of moving an
aesthesia. Keep the treatment button(6) depressed for 30 seconds or as
recommended. The optimum intensity could be adjusted by moving the slide
control(1). If necessary, you may repeat this process for the case subject
to more treatment.
|
What is about the acupuncture pointer?